FIT LED LIGHTS LOOSELY TO ALLOW THE CLEVERSPA® TO EXPAND WHEN FILLED.
To begin with, we recommend laying out your LED lighting kit, checking all parts are present and turning the lights on before installing to your CleverSpa®. Take care to ‘feed’ the LED Lights through the loops on the base of your CleverSpa®. The lights must face upwards. For more details please refer to your CleverSpa® manual.
The correct installation of your LED lights is extremely important and failure to follow the instructions carefully may result in their early failure, but correct installation will ensure they stay working every time you use your spa. The most important issue with installation is to ensure that the lights are not installed too tightly, they must be fitted so they are loose, with freedom to move between the retention loops on the base of the spa to allow the lighting strip to expand when the spa is filled with water. For detailed information click HERE.
Please ensure that some excess lighting strip is left across each gap (they must not be tight), this helps reduce stress on the lighting and allows for expansion of the spa when it is filled with water. Failure to do this may reduce the lifespan of your lighting and cause premature failure. Please see image below.